Lincoln Power MIG 180C Wire Feed Welder
ea
Lincoln Power MIG 180C Wire Feed Welder
Subject to availability
Features
Description
The Millermatic 180 features Auto-Set™, a breakthrough control that automatically sets your welder to the proper parameters. Welds the thickest material in its class, with the highest output in its class. Weld up to 5/16 inch in a single pass.
Heading
| Current Type | DC |
|---|---|
| Max Output | 100-199 |
| Weld Output | CV |
| Welding Processes | MIG (GMAW)|Flux-Cored (FCAW) |
| Customer favorites | No |
| Description | Lincoln Power MIG 180C Wire Feed Welder |
| Item number | MPowerMIG180C |
| New | No |
| Product name | Lincoln Power MIG 180C Wire Feed Welder |
| Staff favorites | No |
Specifications
| Manufacturer Part Number: | K2473-2 |
| Model Number: | Power MIG 180C |
| Processes: | MIG (GMAW), Flux-Cored (FCAW) |
| Input Power: | 1-Phase, 230 V, 21.7 A, 60 Hz |
| Rated Output: | 135 A at 22.5 VDC, 30% Duty Cycle |
| Welding Amperage Range: | 30 - 180 Amps |
| Wire Speed: | 40 - 460 IPM (1.0 - 11.7 m/min) |
| Net Weight: | 72 lb (33 kg) |
Additional Features
Features
- New spool gun compatible - A reliable and economical way to weld aluminum. Hooked up to a Millermatic 180 or 180 with Auto-Set, the new Spoolmate 100 Series spool gun allows you to weld from 18 gauge to 1/4 inch aluminum
- Manual Mode has the flexibility to manually set weld parameters for broader applications
- Smooth-Start™ patent-pending technology provides a smooth, spatter-free start. No pop-gun starts or spatter to clean up
- Durable cast aluminum feedhead incorporates dual groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob all designed to make setup easier and faster
- Thermal overload protection shuts down the unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools
- Tip Saver short-circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit
- Standard built-in solid-state contactor circuit makes wire electrically "cold" until trigger is pulled. Makes unit safer, and is easier to position torch to work before starting weld
- Easy access to output studs provides convenient polarity changeover when switching from solid or flux cored wires
- Self-resetting motor protection circuit eliminates the need to find and replace fuses
- Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with wire sizes .024-.035 in (0.6-0.9 mm) mild/stainless steel and .030-.045 in (0.8-1.2 mm) flux cored
Next Steps
Get the equipment you need – where you need it, when you need it
Ask a Question
Looking for some additional information? Connect with one of our experts to get the details you need.
Contact Sales
Need a quote to rent, lease or purchase equipment? Reach out to our sales team to get started.
Find a Location
Want to visit us at one of our 50+ service centers? Find the Red-D-Arc location closest to you.