RDA CR500 NA Turning Roll Set

Quantity

Subject to availability

Rent

Lease

Used

New

Features

500 Ton Drive/Idler Roll Set Load-Carrying Capacity
750 Ton Drive Roll Load-Turning Capacity
49" to 295" Vessel Diameter Capacity

Description

Red-D-Arc’s RDA CR500 NA turning roll sets feature all-fabricated-steel base construction with wheel brackets that can be manually positioned to accommodate vessels of varying diameters around a constant center-line. Vessel rotation is via a two-motor, two-wheel-drive system which eliminates the need for torque tubes.

Heading

RDA CR500 NA Turning Rolls Spec Sheet

Load Carrying Capacity	2 Ton
Tire Type	Polyurethane
Vessel Diameter Capacity	2" - 48"
Customer favorites	No
Description	RDA CR500 NA Turning Roll Set
Item number	MCR500
New	No
Product name	RDA CR500 NA Turning Roll Set
Staff favorites	No

Specifications

Model:	RDA CR500 NA turning roll set (drive and idler)
Load Carrying Capacity:	Drive: 250 ton maximum Idler: 250 ton maximum Set: 500 ton maximum
Rotation Capacity:	Drive Roll: 500 ton maximum
Wheel Centre Distance:	55.1, 85, 131.5 in
Vessel Diameter Capacity:	49.2 in to 295.3 in
Rotation Speed Range:	3.9 to 41.3 in/min
Tire Type:	Polyurethane, A95 durometer rating
Wheel Size:	33.9 in diameter x 27 in wide
Five Function Control:	Push Button Pendant, 100 ft cable (forward/stop/reverse/speed control/emergency stop)
Rotation Drive Motors:	2 x 7.5 kW with fan cooling
Primary Input Power:	380 to 480 V, 3 phase, 50/60 Hz (optional 600 V, 3 phase, 60 Hz available)
Input Current at Rated Load:	29.9 A
Weight:	Drive: 30,865 lb Idler: 26,456 lb
Control Box Ingress Protection Rating: IP65
Control Box Electrical Certification: UL508
Loading Capacity Certification: UL2011

Additional Features

Drive motors are inverter-controlled variable-frequency AC-type with fan cooling and are fully enclosed for trouble-free operation. Double reduction worm and wheel gearboxes are used for enhanced durability and extended overhaul intervals. Drive and idler wheel shafts are housed in deep-groove-type roller bearings and gearboxes are of aluminum/bronze construction. Both the drive roll and idler roll have forklift slots built into the frames for easy maneuverability. Control boxes have IP65-rated enclosures and utilize variable-frequency AC-control electrical systems with full UL and CE certification. In addition, all our conventional turning rolls have been tested and certified by UL to establish safe working loads - a first in the weld automation industry.