Miller XMT 350 MPa

• Improved pulsed MIG welding
• More control over the puddle and weld bead using SharpArc
• More robust and stable arc at very low arc lengths
• Reduces heat input
• Welds on a wider range of material thicknesses

Sharp Arc on the XMT 350 MPa:

• Can handle virtually any welding job, including those hard-to-weld alloys found at power generation plants and shipbuilding facilities
• A low setting gives a more fluid puddle and a flatter bead appearance
• A high setting gives a less fluid puddle and a ropier bead appearance
• Can be adjusted to help customize the arc for the type of shielding gas being used

Additional features

• Auto-Line Power Management technology allows for any input voltage hook-up (208-575V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power
• 350 amps of welding output at 60% duty cycle enables improved deposition through using larger diameter electrodes common in construction applications
• Available with Dinse or Tweco-style output connectors
• Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition
• Exceptional electrical efficiency. At 400 amps, efficiency is 87.24%, this helps to reduce the utility bill or fuel supply required to weld
• Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance
• Auto Remote Sense enables unit to automatically use remote control if connected to remote control receptacle
• Reduced OCV operation - an internal dip switch enables reduced open-circuit voltage Stick welding capability. OCV is typically below 15 volts
• Process selector switch reduces the number of control setup combinations without reducing any features
• Large, dual digital meters are easy to view and presettable to ease setting weld output
• Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight
• Wind Tunnel Technology™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability
• LVC Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power ± 10%
• Fan-On-Demand Internal power source cooling system that only works when needed, keeping internal components cleaner
• Adaptive Hot Start for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion
• Lift-Arc Simply touch the tungsten to the work piece and the arc is initiated instantly and automatically without the use of high frequency
• Optional 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators, etc