Wel-Handy Multi
ea
Wel-Handy Multi
Subject to availability
Features
- Light weight and portable
- Pulling power of 66 lb (30 kg)
- No track required, eliminating cost and setup time
Description
The Wel-Handy Multi portable welding carriages are used by a wide range of customers, from one man mobile welding businesses to large shipyards with hundreds of welders.
Heading
| Customer favorites | No |
|---|---|
| Description | Wel-Handy Multi |
| Item number | MWel-Handy Multi |
| New | No |
| Product name | Wel-Handy Multi |
| Staff favorites | No |
Specifications
| Pulling Power: | 66 lb (30 kg) |
| Drive System: | 4-rubber wheel drive |
| Travel Speed: | 152 - 1524 mm/min (6 - 60 in/min) |
| Tracking Method: | Vertical plate tracking with guide roller |
| Guide Roller Height | 0.78" (19.8 mm) - adjustable to three different heights |
| Torch Angle: | 40 - 55 degrees |
| Torch Up/Down: | 1.77" (45 mm) |
| Torch Forward/Backward: | 1.77" (45 mm) |
| Un-Welded Area: | Start 5" (124 mm)/End 5.5"" (140 mm) |
| Input Power: | 120 V or 220 V 50 - 60 Hz |
| Dimensions: | H: 10.4" (264 mm) x W: 10.2" (259 mm) x L: 10.2"" (259 mm) |
| Weight: | 15.2 lb (6.9 kg) |
Additional Features
Features
- Multi weld process - Standard and programmable stitch/tack
- Multiple welding options - Twin-torch, weaver/ oscillator, corner welding
- Horizontal and vertical use - Base machines can be used for out-of-position welds
- Light weight at 7kgs (15lbs) - Makes transport and set-up easier
- Pulling power of 30kgs (66lbs) - Provides stable welding even under heavy loads
- No track required - Fillet welds and corner joints can be done without the need for track. Butt and Lap Joints are possible by using angle iron as a guide
- Permanent Magnet - Rare earth magnet holds unit secure to the work piece without the need for electricity
- Easy set up - No guide rails means fast and easy setup. In most cases existing welding equipment can be used
- Automatic height control - The Wel-Handy Multi runs directly on the work piece. On a fillet weld weld this keeps the contact tube to work distance set without the need for a torch height control
- Automatic Shut Down at the end of the weld - Limit switches at each end of the carriage allow the operator to set up a pre-determined stop point using a magnetic block. Once the limit is tripped, the machine travel and welding stops
Next Steps
Get the equipment you need – where you need it, when you need it
Ask a Question
Looking for some additional information? Connect with one of our experts to get the details you need.
Contact Sales
Need a quote to rent, lease or purchase equipment? Reach out to our sales team to get started.
Find a Location
Want to visit us at one of our 50+ service centers? Find the Red-D-Arc location closest to you.